Welcome! Log In Create A New Profile

Advanced

No sound or audio.....no kernel modules loaded at boot

Posted by oldwrinkly 
No sound or audio.....no kernel modules loaded at boot
June 11, 2014 12:06PM
Hi
I have the beta installed everything works except audio.
I have a realtek ALC887 audio / snd_hda_intel
I have downloaded the latest driver from realtek and installed it,
tried various answers from this forum and also from googling, all to no avail.
booting up, red failure error line states `no kernel audio modules loaded`

aplay -l states no sound card
lspci -nn | grep -i audio shows snd_hda codecs but snd_ hda_intel or realtek
sudo alsa reload unloads and loads ok

tried to insert terminal output but would not post

output from another linuxos.........

*** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC887-VD Digital [ALC887-VD Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0

#michael@localhost ~]$ lspci -v | grep -B1 -A12 -i audio

00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Gigabyte Technology Co., Ltd Device a002
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at fdff4000 (64-bit, non-prefetchable)
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC
host controller
Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])

This.... Kernel modules: snd-hda-intel ...is not loading

Hope someone can help

Regards
Mike



Edited 1 time(s). Last edit at 06/11/2014 12:38PM by oldwrinkly.
Sorry, only registered users may post in this forum.

Click here to login