SmartLink Modem problem?
You
might be able to fix it by jumping through a few small hoops in an xterm before you let the fine tuning run.
In an xterm check for the modem...
dmesg | grep slamr
Verify that slamr is loaded...
/sbin/lsmod | grep slamr
If not...
/sbin/modprobe slamr
Then start the driver...
/usr/sbin/slmodemd
If all goes well, then I'd let the fine tuning run and see if it still hangs.
This might work, it might not. I have no idea. This is just where I would start to try to fix it. I would of also just pulled the offending modem if I didn't need it.
Hope I helped and Good luck!